Stain-resistant latex paint Color Light pea green H2464 10L matte

Verified Polish brand

Dear Customers, our products are tinted individually, according to your order, so we ask for thoughtful purchases!

_________________________________________________

Producer: NIKKI

Capacity: 10L

Type: Stain-resistant latex paint

Color: Light pea green H2464

Coating appearance: Deep matte

_________________________________________________

For colored paints, we offer a wide selection of white paints:

Latex paint SUPER WHITE

Stain-resistant latex paint PREMIUM

Anti-reflective latex paint snow white

Ceramic paint SNOW WHITE

_________________________________________________

* To get to know the color in real life, you can order 4 color samples and test the color and coverage.

ATTENTIONThe color visible on your monitor may differ significantly from the actual color due to color reproduction technology, individual monitor settings on your side, and differences in lighting. Therefore, we recommend ordering a sample that reflects the actual color.

By ordering the product without first ordering a sample, you risk receiving a shade that will not fully meet your expectations.

_________________________________________________

Important: When buying products on this auction, you are buying only the color Light pea green H2464.

_________________________________________________

Other colors from the palette are available on another auction.

About the product:

Stain-resistant latex paint deep matte, excellently covering and efficient, based on high-quality vinyl acetate copolymers, free from volatile organic compounds for use on walls and ceilings inside all types of rooms.

Non-flammable paint with high abrasion resistance, safe for allergy sufferers and recommended for rooms where children stay.

After drying, it creates a smooth matte coating.

Tinted according to a palette of 432 colors or others on request.

_________________________________________________

Guaranteed coverage in two coats in every color;

Long-lasting effect of colored walls;

Does not splatter during painting;

The paint coating after drying has a deep matte structure which eliminates light reflections causing the impression of unevenness of the substrate;

High class of abrasion resistance;

Application method: roller, flat brush, gun;

Directly from the manufacturer, produced on an ongoing basis.

_______________________________________________

In care for the safety of your shipments, all parcel orders are fulfilled in iron buckets with a clamping ring and in a sturdy rigid cardboard box.

_______________________________________________

‼ ATTENTION ‼

Due to various substrates and well-developed processing technology, our paints have an extended drying time on the wall.

Therefore, it is necessary to wait at least 4 hours between coats, because shortening it results in worse coverage, and thus the need for another coat of paint. This is the most common mistake in painting, because when painting the next layer, the previous one, not yet set, softens and eventually mixes with the unset coating of the next layer. With such a painting mechanism, even after 4-5 layers, the paint will not effectively cover the substrate.

_________________________________________________

** Before painting, for surface preparation, we recommend using NIKKI primers. Primers are concentrated and require dilution with water in the ratio indicated on the label. Using primers not diluted according to the instructions on the package may result in poor coverage and lead to coating cracking!

‼ Using primers from other manufacturers may lead to poor coverage and surface cracking.

In the set, we recommend the following primers:

Universal primer - before first painting of raw plasters

Deep penetrating primer - before painting on chalky substrate

Primer under paint - to improve efficiency and coverage

_______________________________________________

Paint available in capacities 2L, 5L and 10L

ON THIS AUCTION YOU BUY 10L !

_________________________________________________

In care for the safety of your shipments, all parcel orders are fulfilled in iron buckets with a clamping ring and in a sturdy rigid cardboard box.

_______________________________________________

APPLICATION:

⇨ for indoor use;

⇨ for application on walls and ceilings;

⇨ serves as a finishing layer;

⇨ for use on surfaces prone to contamination;

⇨ for application on properly prepared surfaces: concrete, gypsum plaster, thin-layer plaster, lime plaster, gypsum-cardboard boards;

⇨ the paint can be tinted to one of 432 colors according to the color palette;

⇨ application - with roller, brush, spray.

_________________________________________________

TECHNICAL DATA:

• Packaging: 10L

• Application: spray, roller, brush

• Efficiency: 7m2/1L with one coat

• Recommended number of layers: 2

• Coating appearance: deep matte

• Drying time at 20°C and 60% humidity:

- to touch: up to 2h

- for applying second layer: 4-6 h

• Application temperature: from +10°C to +30°C

• Validity period from production date: 24 months

• Product meets requirements according to standard PN-EN 13300

• Abrasion resistance: class 3

_________________________________________________

STEP-BY-STEP APPLICATION:

STEP I – substrate preparation:

• substrates must be dry, clean, load-bearing and free from dirt, dust, grease stains, anti-adhesive agents from formwork and all substances reducing adhesion to the substrate and may cause discoloration on the surface of dried paint.

STEP II – priming:

• mix primer before use. For dusty and sandy substrates, application with a brush is recommended. Apply primer in one, even and continuous layer.

STEP III – product preparation:

• thoroughly mix the paint to obtain a homogeneous consistency. To obtain a thinner consistency, you can add a small amount of clean cold water - do not exceed a glass of water (0.25L) per 10-liter bucket. Do not aerate the paint during mixing by using too high mixer speeds.

• do not add any accelerators, retarders and other additives to the paint.

STEP IV – painting:

• paint inside rooms at ambient and substrate temperature from +10°C to +30°C.

• apply with brush, roller or hydrodynamic spray 2 layers of paint – with intervals of about 4 h.

• apply carefully and evenly the same amount of paint per unit area of wall or ceiling.

• the last stroke with roller or brush should be done in one direction.

• the paint coating achieves full durability properties after 28 days from completion of painting works.

_________________________________________________