Stain-resistant latex paint color Broken white in pink H3678 2L Matte

Proven Polish brand

Dear Customers, our products are individually tinted according to your order, so we ask for thoughtful purchases!

_________________________________________________

Manufacturer: NIKKI

Capacity: 2L

Type: Stain-resistant latex paint

Color: Broken white in pink H3678

Coat appearance: Deep matte

_________________________________________________

For colored paints, we recommend a wide selection of white paints:

Latex paint SUPER WHITE

Stain-resistant latex paint PREMIUM

Anti-reflective latex paint snowy white

Ceramic paint SNOW WHITE

_________________________________________________

* To get to know the color in real life, you can order 4 color samples and try the color and coverage.

ATTENTIONThe color visible on your monitor may differ significantly from the actual color due to color reproduction technology, individual monitor settings on your side, and differences in lighting. Therefore, we recommend ordering a sample that reflects the actual color.

By ordering the product without ordering a sample first, you risk receiving a shade that will not fully meet your expectations.

_________________________________________________

Important: When buying products on this auction, you are buying only the color Broken white in pink H3678.

_________________________________________________

Other colors from the palette are available on another auction.

About the product:

Stain-resistant latex paint deep matte, perfectly covering and efficient, based on high-quality vinyl acetate copolymers, free from volatile organic compounds for use on walls and ceilings inside all types of rooms.

Non-flammable paint with high abrasion resistance, safe for allergy sufferers and recommended for rooms where children stay.

After drying, it creates a smooth matte coat.

Tinted according to a palette of 432 colors or others on request.

_________________________________________________

Guaranteed coverage in two coats in every color;

Long-lasting effect of colored walls;

Does not splatter during painting;

The paint coat after drying has a deep matte structure which eliminates light reflections causing the impression of unevenness of the substrate;

High class of abrasion resistance;

Application method: roller, flat brush, gun;

Directly from the manufacturer, produced on an ongoing basis.

_______________________________________________

In care for the safety of your shipments, all package orders are fulfilled in iron buckets with a clamping ring and in a durable rigid cardboard.

_______________________________________________

‼ ATTENTION ‼

Due to various substrates and properly refined processing technology, our paints have an extended drying time on the wall.

Therefore, it is necessary to wait at least 4 hours between paintings, because shortening it results in worse coverage, and thus the need for another painting of the wall. This is the most common error in painting, because when painting the next layer, the previous one, not yet set, becomes softened and eventually mixes with the unset coat of the next layer. With such a painting mechanism, even after 4-5 layers, the paint will not effectively cover the substrate.

_________________________________________________

** Before painting, for surface preparation, we recommend using NIKKI primers. The primers are concentrated and require dilution with water in the ratio indicated on the label. Using primers not diluted according to the instructions on the package may result in poor coverage and lead to cracking of the coat!

‼ Using primers from other manufacturers may lead to poor coverage and surface cracking.

In the set, we recommend the following primers:

Universal primer - before first painting of raw plasters

Deep penetrating primer - before painting on chalky substrate

Primer under paint - to improve efficiency and coverage

_______________________________________________

Paint available in capacities 2L, 5L and 10L

ON THIS AUCTION YOU BUY 2L !

_________________________________________________

In care for the safety of your shipments, all package orders are fulfilled in iron buckets with a clamping ring and in a durable rigid cardboard.

_______________________________________________

Application:

⇨ for internal use;

⇨ for application on walls and ceilings;

⇨ serves as a finishing layer;

⇨ for use on surfaces prone to contamination;

⇨ for application on properly prepared surfaces: concrete, gypsum plaster, thin-layer plaster, lime plaster, gypsum-cardboard boards;

⇨ the paint can be tinted to one of 432 colors according to the color palette;

⇨ application - with roller, brush, spray.

_________________________________________________

TECHNICAL DATA:

• Packaging: 2L

• Application: spray, roller, brush

• Efficiency: 7m2/1L with one coat

• Recommended number of layers: 2

• Coat appearance: deep matte

• Drying time at temperature 20°C and humidity 60%:

- to touch: up to 2h

- for applying the second layer: 4-6 h

• Application temperature: from +10°C to +30°C

• Validity period from production date: 24 months

• Product meets requirements according to standard PN-EN 13300

• Abrasion resistance: class 3

_________________________________________________

STEP-BY-STEP APPLICATION METHOD:

STEP I – substrate preparation:

• substrates must be dry, clean, load-bearing and free from dirt, dust, grease stains, anti-adhesive agents after formwork, and all substances reducing adhesion to the substrate and potentially causing discoloration on the surface of dried paint.

STEP II – priming:

• mix the primer before use. For dusty and sandy substrates, application with a brush is recommended. Apply the primer in one, even and continuous layer.

STEP III – product preparation:

• mix the paint thoroughly to obtain a homogeneous consistency. To obtain a thinner consistency, you can add a small amount of clean cold water - do not exceed a glass of water (0.25L) per 10-liter bucket. Do not aerate the paint during mixing by using too high mixer speeds.

• do not add any accelerators, retarders or other additives to the paint.

STEP IV – painting:

• paint inside rooms at ambient and substrate temperature from +10°C to +30°C.

• apply with brush, roller or hydrodynamic spray 2 layers of paint – at intervals of about 4 h.

• apply carefully and evenly the same amount of paint per unit area of wall or ceiling.

• the last stroke with roller or brush should be done in one direction.

• the paint coat achieves full durability properties after 28 days from the completion of painting works.

_________________________________________________