Latex wall paint color red H3525 2L deep matte for walls

Proven Polish brand

Dear Customers, our products are individually tinted according to your order, so we ask for thoughtful purchases!

_________________________________________________

Manufacturer: NIKKI

Capacity: 2L

Type: Latex paint

Color: RED H3525

Coating appearance: Deep mat

_________________________________________________

For colored paints, we recommend a wide selection of white paints:

Latex paint SUPER WHITE

Latex paint STAIN-RESISTANT PREMIUM

Latex paint ANTI-REFLECTIVE snow white

Ceramic paint SNOW WHITE

_________________________________________________

* To get to know the color in real life, you can order 4 color samples and test the color and coverage.

ATTENTIONThe color visible on your monitor may differ significantly from the actual color due to color reproduction technology, individual monitor settings on your side, and differences in lighting. Therefore, we recommend ordering a sample that reflects the actual color.

By ordering the product without ordering a sample first, you risk receiving a shade that will not fully meet your expectations.

_________________________________________________

Important: Buying products on this auction, you buy only the color RED H3525.

_________________________________________________

Other colors from the palette are available on another auction.

About the product:

Matte latex paint with very good coverage and efficiency based on high-quality polymer binders with low content of volatile organic compounds for use on walls and ceilings inside all types of rooms.

It is characterized by good resistance to abrasion and high efficiency. The paint is easy to use, excellent for painting in all residential and utility rooms. After drying, it creates a smooth matte coating.

Tinted according to a palette of 432 colors or others on request.

_________________________________________________

Guaranteed coverage in two coats in every color;

Long-lasting effect of colored walls;

Does not splash during painting;

The paint coating after drying has a deep matte structure, which eliminates light reflections causing the impression of unevenness of the substrate;

Resistant to scrubbing, latex;

Application method: roller, flat brush, gun;

Directly from the manufacturer, produced on an ongoing basis.

_______________________________________________

In care for the safety of your shipments, all package orders are realized in iron buckets with a clamping ring and in a durable rigid cardboard.

_______________________________________________

‼ ATTENTION ‼

Due to various substrates and properly refined processing technology, our paints have an extended drying time on the wall.

Therefore, it is necessary to wait at least 4 hours between paintings, because shortening it results in worse coverage, and thus the need for another painting of the wall. This is the most common mistake in painting, because when painting the next layer, the previous one, not yet set, undergoes softening and eventually mixes with the unset coating of the next layer. With such a painting mechanism, even after 4-5 layers, the paint will not effectively cover the substrate.

_________________________________________________

** Before painting, for surface preparation, we recommend using NIKKI primers. The primers are concentrated and require dilution with water in the ratio indicated on the label. Using primers not diluted according to the instructions on the package may result in poor coverage and lead to coating cracking!

Using primers from other manufacturers may lead to poor coverage and surface cracking.

In the set, we recommend the following primers:

Universal primer - before first painting of raw plasters

Deep penetrating primer - before painting on chalky substrate

Primer under paint - to improve efficiency and coverage

_______________________________________________

Paint available in capacities 2L, 5L and 10L

ON THIS AUCTION YOU BUY 2L !

_________________________________________________

In care for the safety of your shipments, all package orders are realized in iron buckets with a clamping ring and in a durable rigid cardboard.

_______________________________________________

APPLICATION:

⇨ for indoor use;

⇨ for application on walls and ceilings;

⇨ serves as a finishing layer;

⇨ for use on surfaces prone to contamination;

⇨ for application on properly prepared surfaces: concrete, gypsum plaster, thin-layer plaster, lime plaster, gypsum-cardboard boards;

⇨ the paint can be tinted to one of 432 colors according to the color palette;

⇨ application - with roller, brush, spray.

_________________________________________________

TECHNICAL DATA:

• Packaging: 2L

• Application: spray, roller, brush

• Efficiency: 7m2/1L with one-time painting

• Recommended number of layers: 2

• Coating appearance: deep matte

• Drying time at temperature 20°C and humidity 60%:

- to touch: up to 2h

- for applying the second layer: 4-6 h

• Application temperature: from +10°C to +30°C

• Validity period from production date: 24 months

• Product meets requirements according to standard PN-EN 13300

• Resistance to scrubbing: class 3

_________________________________________________

STEP-BY-STEP APPLICATION METHOD:

STEP I – substrate preparation:

• substrates must be dry, clean, load-bearing and free from dirt, dust, grease stains, anti-adhesive agents after formwork, and all substances reducing adhesion to the substrate and potentially causing discoloration on the surface of dried paint.

STEP II – priming:

• mix the primer before use. For dusty and sandy substrates, application with a brush is recommended. Apply the primer in one, even and continuous layer.

STEP III – product preparation:

• thoroughly mix the paint to obtain a homogeneous consistency. To obtain a thinner consistency, you can add a small amount of clean cold water - do not exceed a glass of water (0.25L) per 10-liter bucket. Do not aerate the paint during mixing by using too high mixer speeds.

• do not add any accelerators, retarders or other additives to the paint.

STEP IV – painting:

• paint inside rooms at ambient and substrate temperature from +10°C to +30°C.

• apply with a brush, roller or hydrodynamic spray 2 layers of paint – at intervals of about 4 h.

• apply carefully and evenly the same amount of paint per unit area of the wall or ceiling.

• the last stroke with a roller or brush should be made in one direction.

• the paint coating achieves full durability properties after 28 days from the completion of painting works.

_________________________________________________