Name: eSUN PLA-Metal Polymælkesyre plus (PLA+) Messing 1 kg
SKU: 6922572202795
Price: 397 DKK
Availability: InStock

eSUN PLA-Metal. Printemateriale: Polymælkesyre plus (PLA+), Udskrivning af farver: Messing, Udskrivningshastighed: 100 mm/sek.. Vægt: 1 kg, Diameter: 1,75 mm. Antal pr. pakke: 1 stk<br>

weight

Funktioner

Elastomer, photopolymer and other material which can be used as 3D printing material.

Printemateriale

The colours that can be produced by the printer.

Udskrivning af farver

The maximum speed at which a printer can print.

Udskrivningshastighed

The amount of energy the material can absorb during a high-rate impact before fracturing, measured in kJ/m².

Effektstyrke

The measure of the material's stiffness or resistance to deformation when subjected to bending, measured in MPa.

Bøjningsmoduler

The maximum stress the material can withstand before yielding during bending, measured in MPa.

Bøjningsstyrke

The highest temperature the tip can safely reach to melt various printing filaments, measured in degrees Celsius.

Maksimal ekstruder tip temperatur

The lowest temperature at which the extruder tip must be maintained to ensure the material flows correctly, measured in °C.

Minimum ekstrudertip temperatur

The maximum amount of tensile stress that the material can withstand before failure, measured in kPa.

Elastisk styrke

The mass of the material per unit of volume, measured in g/cm².

Massetæthed

Vægt & størrelser

Weight of the product without packaging (net weight). If possible, the net weight is given including standard accessories and supplies. Please note that sometimes the manufacturer leaves out the weight of accessories and/or supplies.

Vægt

Distance from one side of a body (circle or sphere) to the other side, measured by a straight line passing through the centre of the body.

Diameter

Emballeringsdata

The number of individual units contained within a single sales package, measured in pc(s).

eSUN PLA-Metal Polymælkesyre plus (PLA+) Messing 1 kg

397 kr.

397 kr.

Early Black Friday er i gang: se alle deals

Produktbeskrivelse

eSUN PLA-Metal Polymælkesyre plus (PLA+) Messing 1 kg

397 kr.

397 kr.

Early Black Friday er i gang: se alle deals

Funktioner
Printemateriale	Polymælkesyre plus (PLA+)
Udskrivning af farver	Messing
Udskrivningshastighed	100 mm/sek.
Effektstyrke	5,07 kJ/m²
Bøjningsmoduler	3274,63 MPa
Bøjningsstyrke	92,18 MPa
Maksimal ekstruder tip temperatur	230 °C
Minimum ekstrudertip temperatur	190 °C
Elastisk styrke	63160 kPa
Massetæthed	1,225 g/cm²

Vægt & størrelser
Vægt	1 kg
Diameter	1,75 mm

Emballeringsdata
Antal pr. pakke	1 stk

eSUN PLA-Metal Polymælkesyre plus (PLA+) Messing 1 kg

397 kr.

397 kr.

Early Black Friday er i gang: se alle deals

Produktbeskrivelse

Specifikationer

eSUN PLA-Metal Polymælkesyre plus (PLA+) Messing 1 kg

397 kr.

397 kr.

Early Black Friday er i gang: se alle deals