Name: eSUN ePLA+HS Polymælkesyre plus (PLA+) Lilla 1 kg
SKU: 6922572205185
Price: 353 DKK
Availability: InStock

eSUN ePLA+HS. Printemateriale: Polymælkesyre plus (PLA+), Udskrivning af farver: Lilla, Gennemsigtighed: Ugennemsigtig. Vægt: 1 kg, Tæthed: 1240 kg/m³, Diameter: 1,75 mm. Antal pr. pakke: 1 stk<br>

weight

Funktioner

Elastomer, photopolymer and other material which can be used as 3D printing material.

Printemateriale

The colours that can be produced by the printer.

Udskrivning af farver

The degree to which light can pass through the material, ranging from fully opaque to completely transparent.

Gennemsigtighed

The maximum speed at which a printer can print.

Udskrivningshastighed

The amount of energy the material can absorb during a high-rate impact before fracturing, measured in kJ/m².

Effektstyrke

The measure of the material's stiffness or resistance to deformation when subjected to bending, measured in MPa.

Bøjningsmoduler

The maximum stress the material can withstand before yielding during bending, measured in MPa.

Bøjningsstyrke

The highest temperature the tip can safely reach to melt various printing filaments, measured in degrees Celsius.

Maksimal ekstruder tip temperatur

The percentage increase in length that a material can withstand before failure or rupture.

Forlængelse ved brud

The lowest temperature at which the extruder tip must be maintained to ensure the material flows correctly, measured in °C.

Minimum ekstrudertip temperatur

The maximum amount of tensile stress that the material can withstand before failure, measured in kPa.

Elastisk styrke

The recommended temperature of the printing surface during the fabrication process, measured in °C.

Byggeplade temperatur

Vægt & størrelser

The mass per unit volume of the material, measured in kg/m³.

Tæthed

Weight of the product without packaging (net weight). If possible, the net weight is given including standard accessories and supplies. Please note that sometimes the manufacturer leaves out the weight of accessories and/or supplies.

Vægt

Distance from one side of a body (circle or sphere) to the other side, measured by a straight line passing through the centre of the body.

Diameter

Emballeringsdata

The number of individual units contained within a single sales package, measured in pc(s).

eSUN ePLA+HS Polymælkesyre plus (PLA+) Lilla 1 kg

353 kr.

353 kr.

Produktbeskrivelse

eSUN ePLA+HS Polymælkesyre plus (PLA+) Lilla 1 kg

353 kr.

353 kr.

Funktioner
Printemateriale	Polymælkesyre plus (PLA+)
Udskrivning af farver	Lilla
Gennemsigtighed	Ugennemsigtig
Udskrivningshastighed	350 mm/sek.
Effektstyrke	4,1 kJ/m²
Bøjningsmoduler	2695 MPa
Bøjningsstyrke	78 MPa
Maksimal ekstruder tip temperatur	230 °C
Forlængelse ved brud	17,5%
Minimum ekstrudertip temperatur	210 °C
Elastisk styrke	59000 kPa
Byggeplade temperatur	45 - 60 °C

Vægt & størrelser
Tæthed	1240 kg/m³
Vægt	1 kg
Diameter	1,75 mm

Emballeringsdata
Antal pr. pakke	1 stk

eSUN ePLA+HS Polymælkesyre plus (PLA+) Lilla 1 kg

353 kr.

353 kr.

Produktbeskrivelse

Specifikationer

eSUN ePLA+HS Polymælkesyre plus (PLA+) Lilla 1 kg

353 kr.

353 kr.