ELM327 är en felkodsläsare med WIFI funktion vilket gör det möjligt för en att läsa av bildiagnostiken trådlöst genom wifi nätet. Hitta felet på din bil enkelt och smärtfritt utan att behöva felsöka i timmar och slösa massvis med timmar. Låt felsökaren visa felet.

 

 

ELM327 har stöd för alla OBD-2, OBD2, OBDII, , OBD-II, EOBD protokoll, och kan användas tillsammans med ens Android eller iPhone smartphone trådlöst. Självklart kan man även använda den med sin bärbara dator.

Kan anslutas till datorer, smartphones som iPhone och Android mm trådlöst genom wifi.

På iPhone kan ni t.ex använda er utav följande länkar:
www .palmerperformance.com/download/docs/DashCommand_WiFi_Setup_Guide.pdf
www .devtoaster.com/products/rev/
itunes .apple.com/us/app/fuzzycar/id327822395?mt=8

Felkodsläsare, bilscanner och bildiagnostikverktyg ELM-327. Har er bils Check Engine lampa tänts? Med hjälp av vår ELM-327 kan ni trådlöst hitta felet enkelt och smärtfritt.

 

Tips på program:

scantool.imechatronics.com/downloads.htm

 

ELM327 WIFI OBD diagnostic cable able to detect and interpret obd2 / eobd protocols automatically. It also provides support for high speed communications and a low power sleep mode. It use AT commands to communicate with a host device (PC, notebook, iPhone, iPod touch, iPad and so on). There are plenty of software packages available, which are fully compatible with this tool. Some of them have pretty useful features, such as engine running parameters monitoring, DTC reading and clearing, MPG meter, etc. You can even write your own software on a specified hardware platform if you wish, because the AT commands are fully documented and very well explained. This tool is only 2.7 x 1.25x 0.9 inches, and it comes with a 6 ft OBD2 cable for easy installation. It also includes a power switch built-in to prevent the need for having to constantly disconnect your unit from the OBD2 port. It is compatible with 1996 and later vehicles which are obd2 or eobd compliant. Connecting to your iPhone / iPod touch is made by WIFI connection in adHoc mode.

With proper software installed in the host device, you may have following parameters read out from your vehicle:
Vehicle Speed
RPM
Fuel Consumption
Engine Coolant Temp
Fuel Pressure
Calculated Engine Load
Throttle Position
Intake Manifold Pressure
Air Intake Temp
Timing Advance
Mass Air Flow
Fuel Level
Barometric Pressure
EVAP System Vapor Pressure
Fuel Trim

Protokoll:
- ISO15765-4 (CAN)
- ISO14230-4 (KWP2000)
- ISO9141-2
Kompatibel med:
- SAE J1850 PWM (41.6 kbaud)
- SAE J1850 VPW (10.4 kbaud)
- ISO 9141-2 (5 baud init, 10.4 kbaud)
- ISO 14230-4 KWP (5 baud init, 10.4 kbaud)
- ISO 14230-4 KWP (fast init, 10.4 kbaud)
- ISO 15765-4 CAN (11 bit ID, 500 kbaud)
- ISO 15765-4 CAN (29 bit ID, 500 kbaud)
- ISO 15765-4 CAN (11 bit ID, 250 kbaud)
- ISO 15765-4 CAN (29 bit ID, 250 kbaud)

Vehicle Coverage:
Work with all obd2 or eobd cars.

Elm327 WIFI - iOS Easy Setup Guide, vi rekommenderar Dashcommand till iPhone.

1- Wifi Settings
Search wifi -- Connect to device (SSID: OBDDevice/CLKDevices)
Static Tab -- IP Address: 192.168.0.123 -- Subnet Mask: 255.255.255.0

2- Software Settings
Open Software (your iOS sofware (ex: Rev DashCommand, FuzzyCar ))
Settings: Interface type : ELM -- Data Port : tcp://192.168.0.10:35000

3- Have Fun!

Produkten levereras utan programvara.

Free software:
Scantool.net
GM Mode 22 Scan Tool by Terry
OBD Gauge for PalmOS and Pocket PC by Dana Peters
OBD Logger by Jonathan Senkerik
OBD-II ScanMaster by Wladimir Gurskij (ScanMaster 3.52 - local copy)
obd2crazy.com
OBD2 Scantool by Ivan Andrewjeski
OBDII for ELM322 by David Huffman
pyOBD by Donour Sizemore for MacOSX and Linux
RDDTC by Pete Calinski
Real Scan by Brent Harris
ScanTest for Pocket PC by Ivan Ganev aka a-ser
wOBD by WDT