BMW Steering Wheel Control Interface for vehicles without iDrive and without amplifier. Yellow Permanent 12V Wire Must Be Connected Directly To Battery. Voice Assistant support available with software update (Part Number: SWCREFLASHER)

• Allows you to upgrade to an aftermarket head unit whilst maintaining use of your factory steering wheel controls
• Safety: Allows you to keep your hands on the steering wheel and eyes on the road.
• Plug and play, no cutting of wires required
• Maintains the original features of the vehicle such as date, time and temperature display
• Choose the relevant head unit connection lead according to the make of aftermarket head unit you wish to fit
• For interfaces where phone buttons are supported, the following brands allow pick up/hang up in Bluetooth mode: Alpine, Clarion, Kenwood, Pioneer and Zenec. 
• Please check the connections in the vehicle match the harness you are purchasing
• This product has been developed through carefully documented data and research. Connects2 Ltd. cannot be held responsible for discrepancies/inconsistencies that may occur due to vehicle manufacturing changes or options, or damage that may occur in the vehicle during the installation of components. All application data is subject to change.

The following vehicles are supported with CAN-BUS Steering Controls 40 Pin Fakra Connector without I-Drive headunits and with BMW Professional Headunits:

BMW 3 Series (E90, E91, E92) : 2006-2013

Features Highlight:

Plug and Play

USB Updateable for latest software version

Supports pick up & hang up phone buttons

Works with CAN-Bus

Park Brake

Reverse Gear

Ignition

Illumination

Speed Pulse

Phone Button Support: Supports phone buttons with compatible bluetooth head units

CAN-BUS: Yes

Connection: 40 pin Fakra Connector

Patch lead: 30CM Universal head unit connection lead that can be used with all of the Connects2 steering wheel control interface range.

Included Free CTMULTILEAD.2 Stereo Patch Lead

Universal head unit connection lead for:

    Alpine (3.5mm jack)

    Beat (single wire connection)

    Chinese / Xtrons / 3 wire unbranded units (3 wire connection)

    Clarion (3.5mm jack)

    JVC (3.5mm or single wire)

    Kenwood (single wire)

    LG (3.5mm jack)

    Nakamichi (single wire connection)

    Panasonic  (single wire but NOT AV units)

    Philips (single wire connection)

    Pioneer (3.5mm jack)

    Sony (3.5mm jack)

    Zenec  (single wire)

    Other Chinese SWC learning head units

Notes:

You can simply cut the loops / wires to select which brand you are fitting.

Supplied with instruction sheet

Please note: The CTMULTILEAD.2 patch lead CANNOT be used for Blaupunkt/Becker/ JVC KW-AVX head units /Older Kenwood units with the DIN plug connection. For these models you need to purchase the lead separately which can be found in our ebay store.

Pleae note: CHINESE OR NON BRANDED UNITS MAY NOT FIT THIS FITTING KIT WITHOUT MODIFICATION. BRANDED STEREOS YOU SHOULD HAVE NO ISSUES WITH.

**PLEASE NOTE**

The above is just a guideline. There might be more than one kit available for your vehicle depending on your connections. 

To ensure compatibility, we also recommend that the vehicle connector pictured above is compared to the actual connector on your vehicle. If you purchase this kit and it does not fit your vehicle then you have purchased the incorrect kit for your vehicle.