Tilbage til toppen

Nordens største markedsplads

Leveringer nær dig.

Hos os kan alle få en god deal

Trygt ehandel siden 1999

GNSS Beidou Galileo Glonass GPS NL-8004U u-blox 8 USB roof mount 4,50

Skrive en anmeldelse
1398 kr.
Fragt fra 39 kr.
  • Lagerstatus: Findes i lager
    Forventet leveringstid Hurtig levering
    1-4 Arbejdsdage
    Fragt fra 39 kr.
  • Sælges og sendes af CDON

Overvåg prisen på produktet

Navilock NL-8004U USB 2.0 Multi GNSS Receiver, u-blox 8, 4,5m cable length, IP7x, black

The USB 2.0 multi GNSS Receiver based on u-blox 8 chipset has a built-in antenna for high sensitivity. You can use this GNSS Receiver with a laptop and a suitable routing software for navigation. The NL-8004U GNSS receiver can be installed onto different vehicle roofs (car, truck, bus etc.) by using the included installation material. Thus it can perfectly fit into the vehicle concept, due to its design. 

. Connector: USB 2.0 Type-A male
. Chipset: u-blox 8 UBX-M8030-KT
. Frequency:
  GPS: L1, 1575.4200 MHz
  GLONASS: L1, 1602 (k x 0,5625) MHz
  BEIDOU COMPASS: B1, 1561.0980 MHz
  GALILEO E1, 1575.4200 MHz
  QZSS L1, 1575.4200 MHz
. Accepts the signals of up to 72 satellites at the same time
. Supports AssistNow online / offline, SBAS (WAAS, EGNOS, QZSS and MSAS)
. Supports NMEA 0183 protocols: GGA, GSA, GSV, RMC, VTG
. Auto Baud Rate up to 115200 bps
. Update rate:
  single GNSS: 18 Hz (e.g. GPS solo)
  multi GNSS: 10 Hz (e.g. GPS+GLONASS)
. Sensibility max. -167 dBm
. IPX7 protection class
. LED-indicator for GPS status
. Operating temperature: -20 °C ~ 60 °C
. Power supply: 5 V DC
. Current consumption: max. 45 mA
. Cold start in ca. 26 seconds
. Hot start in ca. 1 second
. Positioning accuracy: 2.5 m CEP (Circular Error Probable) and 2 m CEP with SBAS
. Cable length: ca. 4.5 m
. Dimensions (Ø x H without screw thread): ca. 62 mm x 21 mm

Microsoft Sensor and Location Platform (Website)
. Profit from Windows applications (e.g. weather, maps, etc)
. Supporting the GNSS location platform API (32 bit) 

System requirements
. Windows Vista/7/8/8.1/10, Linux Kernel 2.6
. PC or laptop with a free USB Type-A port
. For devices with OTG function and optional OTG adapter: Windows 10 

Package content
. USB 2.0 receiver
. Mounting material: stainless steel nut and washer
. Navilock support CD incl. driver and user manual 


baseret på 0 anmeldelser

Vise flere anmeldelser (-5)

Se også

Vi har i øjeblikket lukket chatten, men send os gerne mail i stedet for. Vi forsøger at besvare alla henvendelse indenfor 24 timer, og du kontakte os via mail her.