Tilbage til toppen

Nordens største markedsplads

Leveringer nær dig.

Hos os kan alle få en god deal

Trygt ehandel siden 1999

Aeotec Dual Nano Switch With Power Metering
Aeotec Dual Nano Switch With Power Metering
Aeotec Dual Nano Switch With Power Metering
Aeotec Dual Nano Switch With Power Metering
Aeotec Dual Nano Switch With Power Metering
Aeotec Dual Nano Switch With Power Metering

1 / 6

Aeotec Dual Nano Switch With Power Metering

612 kr.
With the AEOTEC Nano Switch all switchable and non-dimmable electric installations (e.g. lighting, sockets...) can be integrated into a Z-Wave network. Thus, the connected load can be switched both wirelessly via Z-Wave and locally via existing wall
Læs mere

With the AEOTEC Nano Switch all switchable and non-dimmable electric installations (e.g. lighting, sockets...) can be integrated into a Z-Wave network. Thus, the connected load can be switched both wirelessly via Z-Wave and locally via existing wall switch. Additionally, the ZW132 has an integrated power metering function which allows to detect the exact energy consumption of the connected load.

The compact radio module (60% smaller than its predecessor Micro Smart Switch) is placed in a wall box right behind the normal switch. The switch is no longer directly connected to the load but acts as input device for the AEOTEC insert that is controlling the load. The switch only sends control signal to the insert which controls the load then again. The solution works with all switch design. You can use a momentary or a toggle switch. It’s recommended to use wall boxes with 65mm depth. But smaller boxes with only 45mm depth can be used also if there is enough space behind the switch. The available space depends on the size of the traditional switch, the dimensions of the wall box and the amount of additional cabling placed in this box.

Features:

  • Flush-mounted radio module
  • Maximum load: max. 2x 1150W
  • Energy metering function
  • Integrates existing installations (lighting, sockets...) into a Z-Wave network
  • Works with momentary or toggle switches 
  • Voltage: 230V, 50Hz
  • Wiring: Neutral conductor required
  • Power Consumption: < 0,8 W
  • Wireless Technology: Z-Wave Plus
  • Dimensions:  42,5x40x20 mm
0
Bliv den første til at skrive en anmeldelse
Policy for anmeldelser og omdømme

Lignende produkter

Vi har i øjeblikket lukket chatten, men send os gerne mail i stedet for. Vi forsøger at besvare alla henvendelse indenfor 24 timer, og du kontakte os via mail. her .